24v Electric Brushless DC Motor

24V Electric Brushless DC Motor (12V BLDC Motor) is a DC motor using electronic commutation technology. It consists of an ironless stator and a permanent magnet rotor. It controls the speed and direction of the motor by using an interleaved controller. Since brushless motors do not require brush wear and friction, they are more reliable, more efficient and use less power than traditional brushed DC motors. It adopts brushless DC motor technology, controls its electromagnetic field through an electronic controller, makes the rotor rotate at high speed, and then drives the transmission system to do work. The output power is 24V/12V, and it has the characteristics of high torque, high speed and low energy consumption. It is a kind of motor widely used in the market at present. The motor is powered by an autotransformer, which has the advantages of high efficiency, small size, high power density, and low noise. At the same time, high-efficiency speed regulation can also be realized through the PWM controller, and the application range is very wide. Can be used in electric tools, machinery, fans, compressors, gear boxes and other equipment. It can also be applied in household appliances, electronic products, automobiles, smart homes and other fields. It can drive smart curtains, fans, electric wardrobes and other household appliances. It can run on low voltage, but also achieve high speed under high load.

24V brushless motor is a kind of motor with high reliability and high efficiency, which is widely used in various fields. Its working principle is mainly to use the principle of electromagnetic induction to convert electrical energy into mechanical energy. Inside the motor, there is a rotating rotor and a stationary stator. There are three coils separated by 120° from each other in the stator. When energized, two sets of targeted magnetic fields interact to generate rotational torque to drive the rotor to start rotating. . The power supply will act on the stator coils respectively, constantly changing the direction of the magnetic field in the coils, so that the rotor will always maintain a stable speed. And the speed of the motor is proportional to the voltage. After the input of the transformer is stepped down, it directly acts on the motor, and the control voltage is equivalent to controlling the output power. So the control voltage can change the speed of the motor. Using the principle of motor induction to convert electric energy, it has a simple structure and high efficiency. It is widely used in various mechanical equipment and home appliances because of its reliability and precision.

Product Parameter

Product Size

Performance Curve

To meet the customization needs of customers. Factors such as motor size, power output, voltage, speed, and temperature rating can all be tailored to the design, and features such as encoders, brakes, and connectors can be added to the motor design as needed. It is important to work with a reputable motor manufacturer or supplier to ensure that a custom motor meets the required performance and reliability standards. Contact me for samples for performance testing

Product Details

Product Description

1. 24v Electric Brushless DC Motor adopts brushless DC motor technology, which has higher efficiency and longer life than traditional brushed DC motors, because electronic commutation technology is used to reduce the wear of mechanical commutation And energy loss, but also reduce the generation of electric sparks and reduce electromagnetic interference.
2. It has the characteristics of low noise and low vibration, and there is no obvious mechanical contact during operation, which avoids frictional noise and vibration. At the same time, the structure of the rotor and stator is more stable, reducing the impact of mechanical vibration.
3. It has a variety of protection functions, such as overcurrent protection, overheat protection, overvoltage protection, etc., which can effectively protect the safe and stable operation of the motor and driver.
4. 3650 motor rated voltage: DC 24V/12V, rated speed: 3000-30000rpm, rated current: 0.14A, size: 36mm*50mm, shaft diameter: 3.175mm, performance parameters can be adjusted according to customer needs;
5. It has the advantages of high efficiency, no wear, no spark, no heat generation, low noise, etc., and can better adapt to the working environment of heavy load and high speed, so that it has higher output horsepower and faster response.

Company Strength

Structure
1. Rotor: Made of permanent magnet material, with multi-pole magnetic poles, the commonly used magnetic poles are 4 poles, 6 poles, 8 poles, etc. The rotor usually adopts an inner rotor structure, and there are some cases where an outer rotor structure is applied.
2. Stator: Composed of coils wound from copper wires and silicon steel sheets, the coils are distributed on the stator core. The current in the stator coils generates a rotational torque under the action of the magnetic field, which drives the rotor to rotate.
3. Bearings: Support the rotor during the operation of the motor. Commonly used bearings include deep groove ball bearings, angular contact ball bearings, cylindrical roller bearings, etc.
4. End cover: used to fix the bearing and seal the inside of the motor, usually made of plastic or metal material.
5. Wire: Used to transmit the current in the motor to the external power supply and controller, etc., usually coiled with copper wire and PVC plastic.
When manufacturing a brushless motor, the design and assembly of the mechanical structure and electrical structure need to be considered to ensure the efficient, stable and reliable operation of the motor. At the same time, a series of performance tests and quality inspections are required to ensure compliance with relevant standards and regulations.

Product Certificate

1. CE certification: This certification means that the products of our motor factory meet the requirements of relevant laws and regulations in the European market, and have the guarantee of safety, health and environment.
2. RoHS certification: This is a European directive on the restriction of hazardous substances in electrical and electronic products. We have passed the RoHS certification, which proves that it does not contain harmful substances and has no harm to human health and environmental safety.
3. ISO quality management system certification: the product complies with the relevant standards and regulations of the International Organization for Standardization and the quality management system certification. All of our products have excellent quality assurance in manufacturing, sales and after-sales service.
4. IATF16949 certification is a quality management standard for the automotive industry, covering the quality system requirements of the entire supply chain, and adopts risk management and continuous improvement methods. This certification standard has very strict requirements for product quality control, production process management, supply chain management, customer satisfaction, etc. Therefore, obtaining this certification standard can prove that the quality and stability of the product have been strictly screened .
5. Safety commitment: The product has good safety performance, can operate normally, and will not cause damage or danger to users.
6. After-sales service commitment: If the user encounters problems during use, we VSD motor provides professional after-sales service, including technical support, repair, replacement and other services, to ensure that the rights and interests of users are protected.

Application

Product Advantages
1. High efficiency: Adopt brushless DC motor technology, which has less loss than traditional motors, energy saving and environmental protection.
2. High precision: It has high-precision control characteristics, can adjust the speed, steering and torque, and has high-speed stability and low noise.
3. Good reliability: No need for carbon brushes and electric brushes, good anti-interference performance, long motor life and low failure rate.
4. Small size: small size, high power, easy to install in various mechanical equipment.

Payment & Delivery

1. Wire transfer payment

Wire transfer payment is a common cross-border electronic payment method. In this way, the buyer sends a wire transfer notice to a foreign bank, instructing them to transfer a certain amount to the seller's designated bank account. The seller shall ship the goods after receiving the payment. Due to the fact that wire transfers are completed through banks, it can ensure safety and transparency.

2. Payment by letter of credit

A letter of credit is a guarantee issued by the buyer's bank to ensure payment upon the seller's performance. Under this payment method, the buyer and seller need to communicate with their respective banks and sign a letter of credit contract. The seller shall ship the goods in accordance with the contract provisions, and the buyer's bank shall pay the seller the payment after receiving the proof of the goods.

3. PayPal payment

PayPal is an electronic payment method where both the buyer and seller need to have a PayPal account. After the seller sends the goods to the buyer, they receive the payment through PayPal. This payment method requires the seller to pay a certain handling fee to PayPal.

We support various payment methods. Please contact our professional customer service personnel for a detailed understanding.

Material of 12V BLDC motor:

1. NdFeB permanent magnet.

NdFeB permanent magnet is a rare earth permanent magnet material with very high magnetic field, high coercivity, and high open magnetic force. This material is suitable for motors used in high magnetic fields, high speeds, and high temperatures.

2. Cobalt iron alloy magnetic steel.

Cobalt iron alloy magnetic steel is a magnetic material with unidirectional magnetization characteristics. It is relatively stable and suitable for motors with higher speeds and temperatures.

3. Carbon fiber.

Carbon fiber materials are very hard and resistant to high temperatures, making them very suitable for use in 24 volt brushless DC motors. This material has very high strength and elastic modulus, and can also be very lightweight to produce items with high strength and wear resistance. It is most commonly used in vehicle and robot applications.

The material of a brushless DC motor is an important factor determining its performance, and plays an important role in the selection and design of the motor. Choosing the appropriate material not only improves the efficiency and performance of the motor, but also reduces the maintenance and failure rate of the motor.