Home - News - Details

How To Increase Motor Stall Torque?

The stall torque of the brushless micro motor is proportional to the rated voltage and torque constant, and inversely proportional to the armature internal resistance of the motor. It can provide low speed and high torque output. The lower it is, how to increase the torque of the motor? Here are a few ways to increase the stall torque of brushless motors:


(1) When the working voltage U of the motor is increased, the T-n curve of the entire motor is lifted up in parallel, the locked-rotor torque of the motor is increased, and the no-load torque of the motor is correspondingly increased, and the speed constant of the motor remains unchanged.


VRK-360SA(1)

(2) Increase the torque constant KT, and n0 will decrease accordingly. The mechanical characteristics of the motor will be hardened, that is, the rotational speed constant of the motor will become smaller (the rotational speed that the motor drops per unit torque will become smaller.)



(3) Reduce the resistance R, use wires with higher copper purity, and do not use aluminum wires or copper-clad aluminum wires. To increase the cross-sectional area of the motor armature wire is to thicken the wire or increase the number of parallel strands of the coil wire. The flat rotor is used to reduce the effective conductor length of the rotor and minimize the length of the rotor end. Brushless motors should use fractional slot concentrated winding motors.



(4) Increase the working magnetic flux Φ, reduce the rotational speed N as much as possible, and reduce R while ensuring that the torque constant KT of the motor remains unchanged or increased.

The above are several methods to increase the stall torque of brushless motors. For more motor information, please refer to Vshida Micro motor Co., Ltd. (www.vsdmotor.com)


Send Inquiry

You Might Also Like