528 DC Gear Motor

The model of this motor which is hot sale by VSD motor manufacturer is G37B528, equipped with 37mm gearbox, rated voltage is 12V or 24V (customized is also available), complete gear ratio, equipped with up to 3 channels of magnetic encoder or optical encoder controller to provide feedback and precisely control motor speed and positioning. It is also equipped with power-on and power-off electromagnetic brakes, EMC suppression capacitor resistors and other functions. Special shaft materials and sizes can also be customized, and OEM/ODM services are provided. 528 DC Gear Motor is a small DC motor with a diameter of 37mm. It uses a reduction device to reduce the output speed and increase the output torque. In addition, it also has the characteristics of high efficiency, low noise, long life and so on.

It is a DC motor that converts electrical energy into mechanical energy. When current passes through the windings, a rotating magnetic field is generated, which interacts with the magnetic field inside the motor to make the motor rotate. Equipped with a gear box with a deceleration function, it includes a deceleration device that reduces the output speed of the motor through the rotation of the deceleration gear, thereby achieving the deceleration effect. The entire working process of the motor requires a power supply to provide electric energy. The current passes through the windings of the motor to form a rotating magnetic field. At the same time, the speed reduction device reduces the output speed of the motor, and finally converts the electric energy into mechanical energy to drive the corresponding mechanical equipment to complete the work.

1. High efficiency and energy saving: Adopting advanced DC motor technology, it has the characteristics of high efficiency and energy saving. It can output larger torque at lower power, thereby reducing power consumption and improving energy utilization efficiency.
2. High reliability: It adopts high-quality materials and manufacturing process, and has the characteristics of high reliability. It can operate stably in harsh working environments, and has a good guarantee for the life and operation stability of the motor.
3. High safety performance: adopt advanced circuit protection measures, with high safety performance. It can effectively prevent overcurrent, overload, overheating and other faults, and ensure the safe and reliable operation of the motor.
4. Easy maintenance: modular design, easy maintenance. It can quickly replace faulty parts, thus improving maintenance efficiency and reducing repair time and cost.
5. Portable and compact: small in size, light and easy to carry. It can adapt to the narrow installation space, and has good running stability, and is widely used in various fields and industries.
This small DC geared motor has main performance characteristics such as high efficiency and energy saving, high reliability, high safety, convenient maintenance, light weight and small size. It is a geared motor with superior performance and convenient use, which is widely used in various mechanical transmission and automatic control systems.

Motor Parameter

Motor Outline

Performance Curve

We will be happy to work with you to determine the best parameters and customization options to meet your specific needs. Our team of experts has extensive experience in designing and manufacturing drivers, encoders, gearboxes, and other electronic components, and we can help you optimize your application for maximum performance and efficiency. Contact us today to discuss your requirements and learn more about our capabilities and services.

Product Details

Pure Copper Wire Winding: Copper is used because it is an excellent electrical conductor. Pure copper is used because it has the highest electrical conductivity compared to other materials.
- High-quality iron core: The iron core is the central part of the motor, which strengthens the magnetic field generated by the current passing through the copper wire.
- Low resistivity: The lower the resistance of a material, the easier it is for current to flow, reducing power loss.
- Good Conductivity: Materials with good conductivity enable better current flow and less power loss.
- High Strength: The strong wire core can withstand the magnetic force generated by the current passing through the wire without deforming or breaking.
- Low Power Consumption: Uses less energy and converts most power into useful output.
- Low heat generation: a lot of heat is generated when in use, so low heat generation means less energy is lost as waste heat.
- High output efficiency: When the DC motor is running, it can convert most of the input energy into useful output with minimal loss, thus achieving high efficiency.

Product Description

1. It is a motor with high efficiency and long life, which can realize high precision, low noise and energy saving operation in various applications.
2. With small size and weight, it can be easily installed and used, which can reduce the noise and vibration of the machine, and improve work efficiency and comfort. It has strong protective performance and can work normally in harsh working environments.
3. The core component adopts high-performance permanent magnets, and is equipped with high-quality gear reduction system, which can realize efficient rotation process.
4. The rotating speed and output power can be adjusted according to the needs of users. It is controlled by advanced electronic technology and has the characteristics of high efficiency, energy saving, and adjustable speed. It can be controlled and adjusted according to actual needs, which can not only meet high-load operation, but also save energy. .
5. The 37mm528 DC geared motor is a highly efficient and stable micro DC motor. The gearbox is used together with a brushed DC motor. Gearbox type: spur gear; gearbox diameter 37mm; DC motor diameter: 33mm; voltage: DC 12V/24V Or customized; gear ratio: 1:18 ~1:3000; no-load current: 0.07A; no-load speed: 100rpm; rated speed: 85rpm
IP rating: up to IP68, which can meet the needs of different applications

Company Strength

WEISHIDA is a professional micro DC motor factory, with more than 15 years of experience in motor development and production, as well as advanced production process and equipment, which can guarantee the quality and stability of products. We have strictly controlled and managed the production process of the products, and have strict quality inspection and verification procedures from raw material procurement to finished product testing to ensure that each product meets high quality standards. At the same time, the production line of low-speed small DC motors has also been optimized and improved to ensure that the production efficiency and key technical indicators of the products are in the best state. In addition to excellent products and production equipment, we also pay attention to service quality and provide customers with comprehensive pre-sales, sales and after-sales services. With a professional team and supporting after-sales service network, it can respond to customer needs in a timely manner, provide comprehensive technical consultation and service support, and ensure that customers' use and maintenance of products are fully guaranteed.

1. Installation environment: Keep it dry, ventilated and dust-proof. At the same time, there should be no other high-temperature or humid electronic equipment around the motor, so as not to affect the working effect of the motor. When installing, a sufficient working distance between the motor and other equipment should also be considered to avoid interference from the surrounding environment.
2. Power supply requirements: The power supply requirements are 12V or 24V DC power supply. If there are other voltage requirements, please contact the vsd motor factory to change the design. At the same time, when replacing the power supply, pay attention to the same polarity of the power supply and the motor to avoid damage to the motor.
3. Wiring method: Pay attention to the polarity of the motor in the wiring method. Generally, two-wire connection is used, and the positive and negative poles of the power supply are respectively connected to the positive and negative poles of the motor. When wiring, you must pay attention to the firmness of the wiring, and the interface should be fastened in time to prevent the line from loosening or disconnecting.
4. Installation location: It needs to be determined according to specific work requirements. Generally speaking, the installation position of the motor should be as close as possible to the working load to reduce the error of the working transmission link. After selecting the installation location, it is necessary to ensure that the motor is firmly fastened and closely matched with other equipment parts without hanging or loosening.
The installation environment, power supply requirements, wiring method and installation location of the 12V DC geared motor need to pay attention to the small details to ensure stability and reliability, so as to better meet the work requirements.

Product Certificate

All products of VSD Micromotor are manufactured in accordance with international quality standards, and a comprehensive quality management system has been established covering all aspects of our operations from R&D to production and customer service. We have implemented strict quality control procedures throughout the production process, including raw material inspection, process inspection and final product testing. We also utilize advanced testing equipment and tools to ensure our products meet our customers' specifications. We have obtained IATF16949, ISO9001, ISO14001 and other certifications to meet different industry standards and customer needs. Our commitment to quality has earned us a reputation for supplying reliable and high-quality micromotor products to customers worldwide. We will continue to pursue excellence in quality management and product innovation to meet the changing needs of our customers.

Some of our partners

1. High-quality materials: Made of high-quality materials, which can effectively reduce friction and vibration, thereby reducing noise.
2. Precision processing technology: The processing technology is very fine, which can reduce friction and vibration, and ensure a relatively low level of mechanical noise.
3. Excellent structural design: The structural design is relatively reasonable, which can reduce the noise and vibration generated during mechanical operation.
4. High-efficiency electronic components: The use of high-efficiency electronic components can ensure the stability of the motor and reduce electronic noise.

Application

1. Industrial manufacturing: conveyor belts, winding machines, plate rolling machines, injection molding machines, die-casting machines, electric welding machines, assembly lines, packaging lines, printing machines, creasing machines, glazing machines, grinding machines, cutting machines, etc.
2. Transportation: control window lift, seat adjustment, door closing, etc.
3. Household appliances: electric fans, exhaust fans, vacuum cleaners, ovens, hoods, refrigerators, air conditioners, washing machines, vacuum cleaners, water dispensers, etc.
4. Medical equipment: surgical instruments, medical gas extractors, infusion pumps, electric operating beds, artificial limbs, ventilators, electrocardiogram machines, operating tables, robotic surgery systems, medical blood pumps, medical syringes, etc.
5. Robotics: Telescoping and rotating robotic arms, dishwashers, robotic vacuum cleaners, robotic arms, drones, humanoid robots, industrial robots, etc.
6. Automation equipment: robots, logistics conveyors, vending machines, etc.

Payment & Delivery

528 DC Gear Motorinstallation steps
1. Prepare tools and materials
The tools and materials required for installation include: screwdriver, screws, guide wheels, cables, power supply.
2. Determine the installation location
Before installation, you need to determine the installation location. Choose a flat surface on which the small motor can rest securely.
3. Install the guide wheel
The guide wheels need to be installed first. A guide wheel will be mounted on the shaft of the motor in order to connect the DC motor to other equipment.
4. Install the cables
Plug in the cable, making sure the plug is properly connected. Then connect the cable and motor with twisted wire.
5. Install the power supply
Insert the power plug into an electrical outlet. Then connect the power plug to the micro motor's power outlet.
6. Connect the motor
Finally, attach the motor to the surface of choice. Tighten the motor screws to make sure the motor is firmly attached.
7. Test
After installation, the last step is to test whether the 37mm DC geared motor is working properly. Connect the power and turn on the motor, make sure it is connected and working.
These steps above will ensure that it is installed and working properly. It should be noted that try not to run the motor under heavy load for a long time, which will cause the motor to overheat and cause damage.

Related accessories of DC Gear Motor
1. Controller: It is used to control the functions of starting, running, stopping and speed regulation of the motor. The controller can choose different control methods according to the needs, such as manual control, automatic control, remote control, etc.
2. Transmission: Used to adjust the speed of the motor to improve the efficiency and performance of the machine. The transmission can be divided into a gear transmission, a hydraulic transmission, an electromagnetic transmission, and the like.
3. Power supply: Provides the power required for motor operation. The power supply can choose AC power supply, DC power supply or battery power supply and so on.
4. Encoder: Used to measure the speed and position of the motor. Encoders can be classified into optical encoders, magnetic encoders, capacitive encoders, etc.
5. Cooler: used for heat dissipation to prevent the motor from overheating and affect the life of the motor. Coolers can be divided into fan radiators, water-cooled radiators, and the like.
6. Mechanical transmission system: used to transmit the power of the motor to the load, such as shafts, couplings, reducers, etc.
7. Accessories: such as connectors, cables, guide rails, mounting brackets, etc., used to fix and connect various accessories and equipment.
8. Optional accessories: such as explosion-proof controllers, high-voltage controllers, positioning controllers, etc., are selected according to actual needs to meet the requirements of specific applications.