Front Hub Motor

The Front Hub Motor is an innovative motor structure that directly integrates the hub with the drive unit, simplifying the drive system design and achieving efficient and convenient power output. It also has the high response and high positioning accuracy of the servo motor, which can complete the precise drive without additional gearbox, making the motor application more flexible, saving space while improving the design efficiency of the whole machine.

 

Front Hub Motor in the quiet performance is particularly good, lower noise, compared to the traditional brush or brushless motor + reducer solution, its quiet effect is significantly better. In order to further enhance the use experience, the motor has a built-in encoder, simple wiring, and strong shock resistance, ensuring the stability and reliability of the equipment under complex working conditions. At the same time, the built-in temperature sensor can monitor the motor temperature in real time to prevent overheating, so as to ensure that the motor is safe in the state of efficient operation.

 

In order to meet the needs of diverse applications, the Front Hub Motor supports customization, including speed, torque, size, control mode, material, output shaft, lead, mounting hole and voltage and other parameters, which can flexibly adapt to a variety of industrial and consumer scenarios, such as electric scooters, electric bicycles, logistics robots and wheelchairs.

 

 

Product 1:

Model number:	VSD-HUB-5.5
Typical applications:	Logistics and transportation robots, electric motorcycles, cleaning robots
Main hot spot:	High control accuracy, quiet, direct drive, external rotor
Custom items:	Qutput shaft, Lead wire, Connector, Mounting hole, Speed, Voltage

 

servo motor specifications：

VOLTAGE		NO LOAD		AT MAXIMUM EFFICIENCY				STARTING
Applicable range	Rated value V	Speed ​​r/min	Current A	Speed ​​r/min	Current A	Torque mN.m	Power W	Torque mN.m	Current A
18~26	24	310	0.16	279	1.433	1058.371	30.908	10540.176	12.842
18~50	48	373	0.096	337	0.912	11130.638	39.907	111874.321	8.668

Motor details picture：

 

Front Hub Motor design:

 

Motor performance：

 

Product 2:

Model number:	VSD-HUB-6.5
Typical applications:	Service robots, automated guided vehicles, warehouse robots
Main hot spot:	Super large torque, outer rotor structure, direct drive, low noise
Custom items:	Output shaft, Lead wire, Connector, Mounting hole, Speed, Voltage

 

Motor parameters：

VOLTAGE		NO LOAD		AT MAXIMUM EFFICIENCY				STARTING
Applicable range	Rated value V	Speed ​​r/min	Current A	Speed ​​r/min	Current A	Torque mN.m	Power W	Torque mN.m	Current A
18~26	24	310	0.16	279	1.433	1058.371	30.908	10540.176	12.842
18~50	48	373	0.096	337	0.912	11130.638	39.907	111874.321	8.668

 

Motor details picture：

 

Front Hub Motor design:

 

 

Motor performance：

 

 

 

VSD's Front Hub Motor integrates a brushless DC motor, encoder and roller integrated structure, with high precision, durability and reliability, which is widely used in electric bicycles, intelligent robots and other scenarios requiring high torque output. The motor is especially suitable for applications where low noise, water resistance and high precision are strictly required.

 

1. Integrated structure design

VSD's Front Hub Motor highly integrates the encoder, motor and drum to ensure that all components are coordinated in operation, thus improving the stability and accuracy of the equipment. The integrated design not only reduces the difficulty of installation, but also improves the reliability of work.

 

2. Simple and convenient installation

With a modular design, the VSD Front Hub Motor is easy to install and compatible with a variety of equipment and scenario requirements. With the support of precise installation, users can quickly deploy, so that the equipment can achieve precise control.

 

3. Excellent low speed stability

Low speed stability is excellent, suitable for applications requiring precise control, such as intelligent transport robots or servo systems. This feature makes the device stable and reliable at low speeds, avoiding jitter.

 

4. Low noise performance

Built-in silent design, compared with traditional brush and brushless + reducer solutions, VSD's Front Hub Motor has lower noise, optimizing the environmental noise when the electric equipment is running, providing users with a quieter experience.

 

5. Simple anti-seismic wiring structure

Built-in high-precision encoder, reduce wiring steps, excellent seismic performance. No matter in the working environment of frequent vibration or bad weather conditions, it still maintains efficient and stable operation.

 

6. Temperature monitoring and protection mechanism

Equipped with built-in temperature sensor, real-time monitoring of motor temperature. Multiple protection mechanisms ensure the safety of the equipment, avoid equipment damage caused by overheating, and extend the service life of the motor.

 

 

With the rapid development of electric vehicle technology today, choosing a reliable Front Hub Motor manufacturer is of Paramount importance. With more than a decade of Motor research and development and production experience, VSD has become a leading supplier of Front Hub Motor in China and is committed to providing customers with the best motor solutions.

 

Our Strengths

Deep research and development accumulation

VSD focuses on the development and production of electric motors, and has continued to innovate for more than 10 years. We invest millions of yuan in research and development every year to ensure that our technology is always at the forefront of the industry.

 

Rapid product development

On average, we can develop a new type of motor every two months, ensuring that we can meet the diversified needs of the market in a timely manner. This ability to respond quickly allows us to offer our customers the latest motor technologies and products.

 

Advanced production facilities

We have our own factory, equipped with advanced automated production equipment and quality inspection equipment. Each motor has undergone strict quality control to ensure its performance and reliability, providing customers with high-quality products at a low cost.

 

Welcome to visit our factory

We are located in Dongguan, Guangdong, China. We sincerely invite you to visit our factory and learn more about our production process and quality management system. We are confident that the site visit will further strengthen your confidence in VSD as a Front Hub Motor manufacturer.

 

Competitive offer & Service

As a leading manufacturer of Front Hub Motor in China, VSD is committed to providing competitive quotations to its customers. Whether you are looking for low-cost motor solutions or need customized services, we can meet your needs.

 

By choosing VSD, you will not only receive the best Front Hub Motor products, but also enjoy excellent customer service and technical support. By partnering with us, you'll be at the forefront of electric vehicle technology!

 

 

1. Simplify the structure and reduce maintenance costs

Front Hub Motor completely simplifies the automotive transmission system, eliminating the clutch, transmission, drive shaft, differential and other components required for traditional vehicles. Compared with these complex mechanical systems, Front Hub Motor can not only reduce the weight of the body, but also reduce the point of failure, and reduce the maintenance difficulty and maintenance cost of the vehicle. The simplification of this design not only improves the overall efficiency of the car, but also increases the utilization rate of the interior space, which is the innovative direction of lightweight car design.

 

2. Support a variety of drive modes, flexible to meet demand

Because the Front Hub Motor has the ability of single wheel independent drive, it can easily achieve a variety of drive modes such as front wheel drive, rear wheel drive and four-wheel drive to adapt to different driving needs. Its unique degree of freedom enables the vehicle to achieve small radius precise turning through the difference in left and right wheel speed, or even reverse rotation, which is particularly important for special vehicles and harsh environment applications.

 

3. Significant contribution of energy saving and environmental protection

In terms of energy conservation and emission reduction, Front Hub Motor contributes to sustainable development by virtue of its high efficiency of energy utilization and environmental protection advantages of no emissions. Compared with traditional internal combustion engine vehicles, the low energy consumption advantage of Front Hub Motor can not only effectively reduce greenhouse gas emissions, but also reduce the dependence on fossil fuels, further promote the realization of environmental protection goals, while bringing consumers a more stable and reliable green driving experience.

 

 

With the rapid advancement of the trend of automobile electrification, the market prospect of Front Hub Motor is very broad. Its simple and lightweight structure, flexible driving mode and significant energy saving characteristics make it a key driving technology in the future electric vehicle design. In the future, with the popularity of electric vehicles and the progress of intelligent network technology, Front Hub Motor is also expected to make new application breakthroughs in the fields of automatic driving and intelligent drive.

 

Front Hub Motor will inject more technological innovation and market vitality into the automotive industry, and is expected to gradually replace traditional drive systems in the next few years to provide consumers with smarter, more efficient and more environmentally friendly automotive solutions.