What are the causes of pressure drop in miniature diaphragm pumps?

Miniature diaphragm pump in the process of using some failure problems, such as diaphragm pump pressure drop, miniature diaphragm pump pressure drop caused by a variety of factors. The following are some common causes.

1. Clogged filter: If the pump filter is clogged, the flow rate will be reduced, which will result in a pressure drop.
2. Air bubbles in the pump: If there are air bubbles in the pump, they will impede the flow, which will lead to a pressure drop.
3. Diaphragm rupture: If the diaphragm is ruptured, fluid will leak from outside the diaphragm, resulting in a pressure drop.
4. Pump head and line blockage: If the pump head and line are blocked, the flow will be reduced, resulting in a pressure drop.

5. Motor failure: If the motor fails, the pump speed will drop, resulting in a pressure drop.
6. Aging diaphragm: The diaphragm may age over time, which reduces its elasticity and leads to a pressure drop.
These are the reasons for the pressure drop in miniature diaphragm pumps, more information about this welcome to consult us at any time!