What are the Parameters and Characteristics of the Fish Tank Micro Submersible Pump?

It is necessary to choose the correct type of fish tank micro submersible pump, but the current cost factors and individual consumers of fish tank pump technology is not enough understanding, due to the unreasonable selection, many pumps are in unreasonable operation, low operation efficiency, waste a lot of energy. There are also pumps because of unreasonable selection, can not be used, or the use of maintenance costs increase, low economic benefits. Thus, reasonable pump selection is also of great significance to save energy. Fish tank miniature submersible pump is a special water pump that can be used in fish tanks, small pools, and other bodies of water. This kind of pump is very small and light, and the micro submersible pump has a strong pumping capacity, can pump the water out or into a small device. This micro submersible pump is not only easy to carry and install, but also very quiet and will not interfere and affect fish or other aquatic organisms. And because of the unique structure of the submersible pump, it can be neatly installed in the fish tank, not only will not affect the beauty, but also can make the water flow, enhance the vitality of the fish tank and the life in the water.

The so-called reasonable pump selection, is to comprehensively consider the pump unit and pump station investment and operation costs and other comprehensive technical and economic indicators, so that it is in line with the principles of economy, safety and application. First of all, when choosing the fish tank micro submersible pump, we need to pay attention to its power and flow rate of two indicators, the size of these two indicators directly determines the operation effect of the submersible pump. Usually, the size of the fish tank, water depth and the internal decoration of the fish tank will affect the choice of the power and flow of the pump, therefore, the best measurement of the size of the fish tank in the purchase of submersible pump in advance, and then according to their own needs to buy. Secondly, the purchase of fish tank micro submersible pump also need to pay attention to its stability and noise problems. Usually, the submersible pump will produce a certain amount of noise in operation, if the noise is too large, it will directly affect its use effect. Therefore, in the purchase of submersible pump, it is best to buy those that have noise reduction function or low noise products. Finally, the purchase of fish tank micro submersible pump also need to pay attention to its safety problems. It is more reliable to choose submersible pumps with multiple protection mechanisms that can help us avoid safety problems such as leakage and overheating. Therefore, it is best to buy those products with multiple protection mechanisms.

Fish tank micro submersible pump is a small equipment used for water circulation and filtration of the fish tank. Its operation principle is driven by the motor to rotate the turbine in the water, suction the water into the pump, and then discharge through the outlet. At the same time, there is also a filter material in the pump, which can filter out the impurities and dirt in the water and keep the water clean. Fish tank micro submersible pump can also drive the air stone or oxygen pump to work together, so that the oxygen content in the fish tank water increase, promote the growth and health of fish. The use of the fish tank micro submersible pump can effectively improve the water quality of the fish tank, increase the amount of dissolved oxygen in the water body, but also can create a good living environment for the fish. Therefore, it is widely used in aquarium facilities such as family fish tanks, water features and fish ponds.

Specifically, there are the following aspects: must meet the requirements of flow and head, that is, the operation of the aquarium submersible pump (the intersection of the device characteristic curve and the performance curve of the pump) is often maintained in the efficient range, so as to save power and not easy to damage the parts. The selected pump should not only be small in volume, light in weight, cheap in cost, but also have good characteristics and high efficiency. Smooth operation, and long service life.

The required flow, according to your fish tank or fish pond water and fish species and breeding density. The way of the filtration system should be taken into account. Pressure: suction tank pressure, drainage tank pressure, pressure drop in pipe system (head loss). Know the characteristic curve of the fish tank submersible pump if needed. When designing and arranging pipelines, the following items shall be noted:

Reasonable selection of pipe diameter, pipe diameter, in the same flow, liquid flow speed is small, resistance loss is small, but the price is high, pipe diameter is small, will lead to a sharp increase in resistance loss, the head of the selected pump increased, wear power increase, the cost and operating costs are increased. Therefore, it should be considered from a technical and economic perspective.

The discharge pipe and its joints shall consider the maximum pressure withstand. It is best to choose the frequency conversion fish tank submersible pump. The pipe layout should be arranged as far as possible to minimize the accessories in the pipe and reduce the length of the pipe as far as possible. When you must turn, the bending radius of the elbow should be 3~5 times the diameter of the pipe. Valve (ball valve or stop valve) and check valve must be installed on the discharge side of the pump. The valve is used to adjust the operating point of the pump. When the check valve can prevent the reversal of the pump and enable the pump to avoid the blow of the water hammer.

Select the pump to determine the flow of the tank or tank and the head flow: if the tank calculates the required water circulation flow, give the minimum, normal, maximum flow, should be considered according to the maximum flow. If the fish tank gives a normal flow rate, a certain margin should be considered. For large flow low surprise head pumps with ns> 100, the flow margin is taken from 5%, for small flow uplift and pump with ns <50, the flow margin is taken from 10%, and 50 ns 100 is also taken from 5% to 10.

The above is our VSD motor to share with you about the fish tank micro submersible pump expertise. For more information, please contact our professional customer service personnel to answer. Thank you for clicking and watching.