How To Prevent Micromotor From Burning Out?

Micro motor is a kind of mechanical product that works and rotates for a long time. Due to its internal structure and its own performance, if it is used improperly, it may cause the micro motor to burn out. So what can be done to prevent it? Generally, there are many reasons for the burnout caused by improper use. The following will introduce the reasons for the burnout of the motor and several small methods to prevent the burnout.

1. Observe whether there is vibration, vibration amplitude, noise and abnormal odor when the motor is running, stop the working state of the motor immediately when smelling the peculiar smell, check whether the screws are loose, whether the grounding device is reliable, and promptly find out the cause and eliminate the fault.

2. To keep the working current of the motor not too large. Due to the excessive load of the motor, during operation, it is necessary to check whether the transmission is flexible and reliable; whether the concentricity of the coupling is standard; the flexibility of the gear transmission, etc., if there is a stuck phenomenon, it should be stopped immediately and the fault will be corrected. run.

3. It is necessary to regularly check and maintain the control equipment of the geared motor, which plays a decisive role in the normal start of the motor. The control equipment of the motor should be located in a dry, ventilated and easy-to-operate location, and dust should be removed regularly. Always check whether the contactor contacts, coil cores, wiring screws, etc. are reliable, and whether the mechanical parts are flexible, so that the micro motor has always maintained a good technology

state, so as to ensure that the motor works smoothly without being burned.

4. The micro motor is prone to motor burnout due to the entry of dust, water and debris into the interior to form a short-circuit medium. Therefore, keeping the motor clean is the first condition to prevent the motor from burning. It is also necessary to clean the outside of the micro motor frequently, and do not let dust and other debris in the cooling system of the motor to ensure that the heat dissipation of the motor is in good condition.

The above are the reasons that cause the motor to burn out and several small methods to prevent it. I hope it will be helpful to everyone. If you want to know more motor tips, please continue to pay attention to Vshida Micro motors.