What Should Be Paid Attention To When Using The Micro Air Pump?

The micro air pump is small in size, low in noise, low in power consumption, easy to operate, easy to carry, maintenance-free, and can run continuously for 24 hours. Because it is dry and oil-free, it does not require vacuum pump oil or lubricating oil, so it will not contaminate the working medium, and will not interfere with the analysis of the medium, etc. And the price is relatively much cheaper. Let me introduce to you what needs to be paid attention to when using the micro air pump?

1. First check whether there is a certain pressure in the micro air pump. If there is vacuum at the suction port or pressure at the exhaust port before starting the micro air pump, another technical parameter of the pump should be considered: the maximum starting load PIs value of the air inlet and the value of the maximum starting load POS exhaust port.

2. The medium temperature of the micro air pump.

According to the temperature of the medium gas passing through the air pump, choose the ordinary micro air pump or the high temperature air pump.

3. First check whether the micro-pump already has a certain pressure. If the micro-pump already has the pressure of the exhaust or exhaust port pump at its suction port before starting, consider another technical parameter: the air inlet is relatively large and started. The load rate is the urine value, and the exhaust port is relatively large to start the load rate value.

4. Electromagnetic interference of micro air pump.

If there is a circuit to control the micro air pump, depending on the anti-interference ability of the circuit, a micro air pump with precise electromagnetic interference may be required.

Application range of micro air pump: priority projects in the field of micro air obstetric medicine, chemical composition, instruments, chemical analysis, medical care, hygiene, sanitation, water treatment, etc.