Notes On The Use Of Miniature Diaphragm Pumps

Diaphragm pump is a relatively special form of positive displacement pump. It relies on the reciprocal drumming of the diaphragm to change the volume in the chamber, the liquid will be sucked and discharged. In the use of miniature diaphragm pump process there are some precautions, the following to give you an introduction

1, to ensure that the maximum particles contained in the liquid does not exceed the maximum safe particle diameter standard of the pump.
2, the inlet pressure should not exceed the maximum allowable pressure of the pump, higher than the rated pressure may lead to personal injury and property damage, and damage to the pump, affecting its work performance.
3, to ensure that the pump in the piping system can withstand the highest outlet pressure obtained, to ensure that the drive air system clean and normal working condition.

4, electrostatic sparks can cause an explosion, resulting in personal injury and property damage, as needed to use a large enough cross-sectional area of the conductor, the pump on the ground screw properly and reliably grounded.
5, the pump and each connection pipe plug connected tightly to prevent vibration shock caused by electrostatic sparks, you can use anti-static hose.
6, To regularly check and test the reliability and safety of the grounding system, the grounding resistance is required to be less than 100 ohms.
7,Keep a good working environment, exhaust and ventilate from time to time, and keep away from flammable and explosive sources and heat sources.

The above is the diaphragm pump in the use of some attention, if you want to know more information about, welcome to consult Vshida micro-motor at any time!