What Are The Lubrication Methods Of Gear Motor Reducer?

The gear reducer motor is a mechanical device that reduces speed by using gear transmission at all levels. Friction causes the gear of the gear reducer motor to wear out. The mechanical components of the gear reducer are easily damaged if they are not oiled in a timely manner. As a result, one of the crucial requirements for ensuring the correct operation of the gears and bearings is the lubrication of the gear motor. What techniques are typically employed to lubricate the gear motor reducer, then?

1. Method of drip lubrication

Let the lubricating oil drip onto the wheel motor reducer drop by drop using the weight of the lubricating oil.

2. Method of jet lubricating

This method, in which the oil is directly pressurized and sprayed by the oil pump through the nozzle when the peripheral speed is greater than 12–14 m/s and the splash lubrication effectiveness is poor, is appropriate for closed gears.

3. Method for lubricating oil rings

This lubrication technique rotates a ring that is bigger in diameter than the shaft, bringing lubricating oil from the oil reservoir below to the journal.

4. Method of splash lubrication

Splash lubrication is when the gear sealed in the reduction box rotates at a high speed, causing the lubricating oil to be sprayed and atomized into tiny droplets and brought to the friction pair to create automatic lubrication, or it is first concentrated in the oil collector before flowing into the lubricating part through the designed oil groove.

5.method of pressure lubrication

The engine can be equipped with an oil pump, which will use its pressure to deliver lubricating oil to each gear lubrication point. The plunger pump is positioned in the casing, and by means of its reciprocating motion, the oil supply is made possible.

The gear reducer motor lubrication technique used by Vshida Micromotor is described above.For more information, please feel free to consult us.