Why Can’t The Air Outlet And Exhaust Port Of The Pump Be Exchanged?

A micro air pump is a small gas transmission device that can transport air or other gases to a target location through a series of complex design and manufacturing processes. Compared with other transmission tools, it is small in size, light in weight and high in work efficiency. It is widely used in medical equipment, instrumentation, food processing, environmental protection equipment and other fields. DC 12V Micro air pumps usually have an air inlet, an air outlet and an exhaust port. But why can't they be swapped? Let us explain VSD motor in detail below.

First, we need to understand the functions of the air outlet and air inlet. The air inlet is the port that introduces air to the air pump. The vacuum air pump will compress the air and send it to the air outlet. This process is called inhalation. The air outlet is the port through which the compressed air is pushed out of the air pump. This process is called exhaust. The exhaust port is used to discharge moisture, impurities and waste gas accumulated in the air pump.

For a normal micro air pump, the air outlet should be reinforced, the air inlet cannot be broken by the action of high-pressure gas compressed by air, and the exhaust port needs to be connected to the exhaust pipe. Since these three ports have different functions and characteristics, their location and design have strict standards.

If the air outlet and exhaust port are exchanged, the air pump cannot discharge the compressed air from the correct position, which may seriously affect the performance and life of the small diaphragm air pump. If the air inlet and outlet are swapped, the diaphragm pump will not be able to compress the air from the correct location and push it to the air outlet. As a result, the air vacuum pump will not function correctly.

To sum up, the positions of the air inlet, air outlet and exhaust port of the micro air pump are all required and cannot be changed at will. In order to ensure its normal operation and extend its service life, we should follow relevant usage and maintenance regulations.

The above is what Weishida Company introduced to you as to why the air inlet and air outlet of the diaphragm vacuum pump cannot be changed. If they must be changed, they can only find a suitable supplier to open a mold and produce them to meet the customer's requirements. You cannot change them at will, otherwise it will Affect product service life and performance.