How to increase the torque of micro geared motor?

The design and structure of small geared motor determines how to improve the torque of small geared motor, here are some common methods.
1. Increase the input voltage. The output power and torque of the motor can be increased by increasing the input voltage. To avoid damaging the motor or gearbox, care should be taken that the input voltage is selected to match the rated voltage and power of the motor.

2. Increase the reduction ratio. By increasing the reduction ratio, the torque of the gear motor can be increased. This is due to the fact that a larger reduction ratio will result in a higher output torque but a slower output speed. It should be remembered that increasing the reduction ratio will also put more stress on the gearbox, which may shorten its service life.
3. Replace the high-efficiency gearbox. By replacing the high-efficiency gearbox, the output torque of the geared motor can be increased by reducing heat generation and energy loss.
4. Increase the size and weight of the motor. By increasing the size and weight of the motor, the output torque of the motor can be increased. But this also increases the cost and complexity of installation

5. Use high performance magnets and wires. Using high performance magnets and wires can increase the efficiency and output power of the motor, which in turn increases the output torque of the geared motor.
The above is the Vshida micro motor for you to increase the micro geared motor torque method, more information about the welcome to consult us at any time!