Home - Knowledge - Details

How to maintain the internal accessories of the speed reducer motor?

Routine maintenance is essential to extend the life of the gear motor and the safe operation of the machine. Today, we will look at how to maintain the geared motor.

GB25-320SH-(5)

1. micro reducer motor in the oil release screw plug for oil change, discharge the contaminated oil and cleaning agent, should open the bottom of the box seat, oil pool low oil release hole, usually block the oil release hole with a screw plug, oil release screw plug and the box between the joint surface should be added gasket for leak-proof, need to frequently open the machine to check.

2. When the micro reducer motor is running, the temperature inside the box rises, the gas expands and the pressure rises. In order to make the box thermal expansion of air can be free to discharge, in order to maintain the pressure balance inside and outside the box, does not cause the lubricating oil along the sub-box surface or shaft extension seals and other gaps leakage, usually installed in the box department ventilator.

GB37-EC3630-(4)

3. miniature motor bearing cover for fixed axial position of the shaft system components and axial load, bearing housing hole ends with bearing cover closed.

4. Each time the box cover is disassembled, to maintain the accuracy of the bearing housing hole manufacturing and processing, should be in the finishing bearing hole before the box cover and box seat coupling flange with the positioning pin

GBP22-180SH-(4)

5. Use the oil level indicator to check the oil level in the oil pool of the reducer and make sure it is kept at the proper level.

The above is a few ways to share with you today the daily maintenance of the internal accessories of the gear motor, hope it will help you, for more information, please feel free to consult us!


Send Inquiry

You Might Also Like