How to disassemble the motor in the gear motor?

The installation and disassembly of the gear motor need to comply with the operating specifications to avoid unnecessary damage to the motor. Today, we will introduce how to disassemble the motor of the gear motor

1. To separate the motor from the drive unit, first remove the motor's external wires and clearly identify them. Then, unscrew the foot screws.

2. Remove the pulley or connector from the motor shaft. In some cases, you may need to apply kerosene to the space between the pulley and the motor shaft to make it easier to remove.

3. On motors with rolling bearings, the outer bearing cover should be removed first, followed by the loose end cap fastening screws, and finally, the fastening end cap screws screwed into the motor end cap, specifically set in the two screw holes, in the joints between the end cap and the housing.

4. When disassembling the motor with brushes, the brushes should be removed from the brush grip, and for DC motors, the neutral direction of the brushes should be marked with a symbol.

5. When disassembling the rotor, be careful not to touch the stator coil. The rotor does not weigh much and can be removed by hand. However, for heavier items, lifting equipment should be used.

The above is the steps on how to disassemble the gear motor, hope it will help you, more related information welcome to consult us at any time