How to refuel the permanent magnet DC motor?

In order to ensure the normal operation of the DC motor equipment, it is crucial to refill the motor regularly. The amount of refueling of the DC motor must meet specific specifications and follow established operating procedures. You can learn more about the specific steps to fuel a permanent magnet DC motor in the following paragraphs.

1. Turn off the main power of the permanent magnet DC motor and wait until it reaches the residual temperature (it should still be kept warm when changing the oil).

2. Insert a suitable oil plate into the oil drain hole of the DC motor.

3. Loosen and remove the breather, drain and fill plugs.

4. Drain any remaining oil from the DC motor and clean the chassis of metal chips and other contaminants.

5. After removal, reinstall and tighten the oil drain plug.

6. Fill the oil filling hole with the same grade of lubricating oil, pay attention to the oil supply, increase according to the oil standard, no more and no less.

7. After adding oil, tighten the screw plugs on the vent hole and the oil filling hole.

The steps for refueling the permanent magnet DC motor are as described above. If you would like to know more about DC motors, please feel free to contact us.