Want to make your motor last longer?

When the DC gear motor is used for a long time, there will be more or less some faults. If proper maintenance can be carried out, it can not only reflect its use effect, but also save some maintenance costs during use. At this time, daily maintenance is very important. The following is a brief introduction to the daily maintenance of the geared motor.

1. Maintenance of the lubrication system: Clean the filter and liquid tray to ensure smooth oil passage, and the oil hole, oil rope and linoleum are clean and free of debris. Check the oil quality and keep it in good condition. Keep the oil cup intact and the oil mark clear.

2. Maintenance of the tailstock: Shake out the tailstock sleeve, wipe and oil it, and keep the inside and outside clean.

3. Appearance protection: Clean the outer surface and cover of the geared motor, keep the inside and outside clean, free of rust and oil stains, check and complete the cleaning of all screws, handle balls and handles. After cleaning and wiping, all parts should be lubricated as needed.

4. Electrical maintenance: clean the dust on the motor and the chassis, and fix the electrical devices neatly.

5. Gearbox maintenance: Clean the gears and bushings, and fill the oil cup with new grease. Adjust the gear meshing clearance and check whether the bushing is shaken.

It is very important to do a good job of protection measures for the DC geared motor, so as to ensure that the equipment has a long service life and a good use effect. Want to make your motor last longer? If you want, follow the instructions above to maintain it carefully.