What are the methods of vacuum pump maintenance?

In order to ensure the service life and smooth operation of the vacuum pump, daily maintenance work is essential, today we will introduce the maintenance method of the vacuum pump

1. The inlet pipe of the vacuum pump needs to be tightly sealed so that neither water nor air can leak.

2. It is forbidden to run the vacuum pump under cavitation condition.

3. avoid using the energy-saving vacuum pump under the high flow condition as much as possible.

4. check the current value of the energy-saving vacuum pump motor regularly, it can't be higher than the rated current of the motor.

5. To prevent accidents, it should be supervised by someone during the operation of the vacuum pump.

6. after 5000 hours of use of energy-saving vacuum pump, the bearings need to be refueled

7. After the vacuum pump runs for a long time, if there is noise and vibration due to mechanical wear and tear, it should be stopped and checked, and the wearing parts can be replaced if necessary.

8. The mechanical seal lubricant of the vacuum pump must be free of solid particles and clean.

9. When the mechanical vacuum pump seal is dry-wearing, its operation should be completely prohibited.

The above is the daily maintenance method of vacuum pump, hope it will help you, for more information, please feel free to contact us!