What does gear motor grease do?

One of the critical areas of the geared motor that requires lubrication is the gear. It often operates in a unique setting with high temperature and rapid speed. As a result, synthetic oil must be used to lubricate and quiet the gear of the geared motor at high temperatures and high speeds. What is the function of high temperature gear grease? The Vshida micromotor is briefly examined below.

1. Increase the tooth surface's resistance to wear.

The primary component influencing the wear of the tooth surface is the contact stress. The contact stress of the tooth surface is directly impacted by the lubrication state of the gear grease due to its continuous and consistent oil film strength, which increases the tooth surface's resistance to fatigue. performance.

2. Reduce gear transmission noise and vibration

Since there are numerous factors that contribute to gear vibration and noise, lubrication is crucial. Gear grease's viscosity helps to lessen these factors, but different lubrication techniques and greases also have an impact on gear vibration and noise. Select the proper gear grease because the impact of noise varies.

3. lessen tooth surface abrasion

Gear grease can withstand any occurrence of a boundary state because it creates a lubricating elastic oil film with a certain strength between the gear meshing surfaces, which separates the meshing tooth surfaces. Additionally, under extreme pressure, the additives in the gear grease chemically react with the metal surface to produce a lubricating film, allowing the gear separation to be maintained and wear to be prevented.

4. Avoid tooth surface gluing to protect your teeth.

A frequent type of gear transmission failure is gluing. In other words, on the meshing tooth surface, when the load and speed exceed the lubricating film's bearing capacity, the lubricating film ruptures, the materials come into direct contact, causing dry friction and wear, and the tooth surface temperature rises quickly. Adhesion between them creates glue damage. The gear oil promotes the separation of the meshing tooth surfaces and prevents adhesive damage thanks to its stickiness, bearing capacity, and strong pressure resistance.

The four functions that gear grease can perform are listed above. Please feel free to consult for more details.