Measures To Prevent The Phenomenon Of Oil Return in Permanent Magnet DC Motors

In order to prevent the PMDC motor from returning oil and to ensure its normal performance, routine inspection and maintenance should be performed. Operating procedures should also be followed. The following measures can be taken to prevent the oil return phenomenon of permanent magnet DC motors

1. The oil near the motor exhaust valve is separated from other oil and the oil level barely exceeds the partition wall.

2. Adjust the side exhaust valve and oil tank to lower the oil level and reduce the oil volume.

3. The valve piece should be flexible, and the motor base should be flat.

4. Shaft seal river static seal parts must be firm and replaced as needed.

5. Insert the tube into the oil hole so that the oil level is just above the oil inlet.

6. Configure the equipment with a check valve mechanism to automatically close the oil inlet hole when the motor is turned off.

7. Configure the oil motor and auxiliary device to close the oil circuit when the motor stops working.

8. Equipped with a filling valve at the motor port of the equipment.

The above is to introduce you to prevent the phenomenon of permanent magnet DC motor oil return measures, I hope it will help you, for more information, please feel free to consult Vshida micro-motor