130mm DC Brushless Motor

Fitness has become an integral part of many people's lives. In order to make fitness equipment more professional and comfortable, we use external rotor brushless DC motors to improve the performance of fitness equipment and create the best fitness experience for sports enthusiasts. This 130mm DC Brushless Motor can provide highly stable power during use, making the fitness equipment operate very smoothly, allowing athletes to focus on their own training without worrying about the quality of the machine. At the same time, the use of brushless DC motors can reduce noise at the same time, making the entire exercise environment quieter, thereby enhancing the comfort of the exerciser.

This brushless DC motor for fitness equipment also has the characteristics of long life, so that the fitness equipment can be kept in good condition for a long time. In this way, for users in different environments such as gyms and home gyms, the cost of item replacement can be effectively reduced, making investment more efficient.
Finally, this 310VBLDC motor is not only convenient to use, but also has green and environmental protection attributes. It uses more efficient power resources than traditional motors, so it can better support the concept of environmental protection. At the same time, it also has a higher degree of environmental protection in terms of waste disposal and reuse, so that it can better meet the needs of contemporary society.

It is mainly composed of rotor, stator, brushes, sensors and other parts. There is no brush wear, and it is replaced by a sensor to control the direction and magnitude of the current, so it is also called a sensor motor. In the 310-volt brushless motor, the sensor detects the position and speed of the rotor, and feeds back the signal to the controller. The controller determines which coils need to be energized and the size of which coils need to be changed according to the signal, so as to control the motor speed and running direction. This process is driven by an external input power supply. The current enters the coil from the power supply. Under the action of the coil, the rotor will rotate with the magnetic field, thereby converting electrical energy into mechanical energy to achieve the purpose of driving fitness equipment. There is no brush friction and wear, which reduces the problems of noise and coating peeling, and has the advantages of high efficiency, good stability, and long life, so it is widely used in various occasions.

Product Parameter

Product Size

Performance Curve

The above parameters are for reference only.VSDmotor provides customized design services. According to customer needs, we can customize size, speed, voltage, torque, lead wires, lead terminals and other accessories, and provide OEM/ODM services for customers. Customers are welcome to contact us and obtain samples for performance testing.

Product Details

	100% actual photos
The rotor is surrounded by permanent magnets, which is lighter, more energy-efficient, and can start and stop faster, making it more compact, less noisy, and does not require power consumption		The aluminum alloy material can withstand a large load, has good corrosion resistance, high precision, and has a positive effect on environmental protection.

Motor Description

1. Specifications: Model: VBL-130133; No-load speed: 700± 10% rpm; Rated speed: 600± 10% rpm; Rated torque: 10 N.m; Rated power: 600 W; IP grade: IP31;
2. Dimensional parameters: the diameter is 130 mm, the power supply voltage is 310 volts DC, and the power is relatively large, which can meet the operation requirements of relatively large power equipment. The length and weight can be adjusted appropriately according to specific requirements.
3. Performance characteristics: It has performance characteristics such as high efficiency, high torque, and large speed range, which can provide sufficient power for fitness equipment. No additional maintenance is required, and at the same time, it has excellent characteristics such as long life, high reliability, low vibration, etc. The 130mm DC brushless motor stator is manufactured by high-precision CNC machine tools with high accuracy and higher reliability.
4. Scope of application: Suitable for various types of fitness equipment, such as treadmills, spinning bikes, shuttles, etc. It can provide stable and continuous power for these fitness equipment to achieve various fitness purposes.
5. Detailed design: the wire interface and motor bearings are carefully designed, which is more convenient and safe to use. The wire interface adopts standard design and connection method, which can be connected with various controllers conveniently and quickly; the motor bearing adopts high-precision bearings to provide better mechanical support and reduce the level of vibration and noise.

Company Strength

1. Outer rotor structure: The outer rotor structure design is adopted, which greatly improves the rotation efficiency and torque output capacity of the motor, and is conducive to improving the movement stability and comfort of the equipment.
2. Brushless DC technology: The motor adopts brushless DC technology, which has higher efficiency and life, higher reliability, lower maintenance cost and longer service life than traditional brushed DC motors.
3. High power output: The motor has a rated power of 310V and can output up to 1000W, which can meet the needs of different types of fitness equipment for motor power output.
4. Stable performance: Equipped with a high-precision control system, it can realize precise speed control and load sensing, ensuring the smoothness, stability and safety of equipment movement.

5. Quiet design: It adopts noise reduction design, with low noise and stable operation, which can meet the needs of users for a quiet sports environment.
6. High efficiency and energy saving: the high-efficiency energy-saving design is adopted, which can reduce energy waste, improve energy utilization rate, and at the same time reduce the user's electricity cost.
7. Safe and reliable: It conforms to international standards and safety regulations, has high reliability and long service life, and can maintain stable performance under long-term high-intensity use, providing users with safe and reliable guarantees.

1. Fitness equipment: drive treadmills, exercise bikes, rowing machines, sit-ups and other fitness equipment,
2. Medical equipment: blood analyzer, medical oxygen machine, medical injection pump, etc.,
3. Smart home: It can be used for smart home devices such as smart curtains, smart door locks, and smart windows
4. Industrial equipment: automated production lines, vending machines, vending machines and other industrial equipment

1. Lightweight: The aluminum alloy material has the characteristics of light weight, so the motor casing made of it is light in weight, which can reduce the weight of the entire motor and improve the efficiency of the motor.
2. Good thermal conductivity: the aluminum alloy material has good thermal conductivity, which can quickly dissipate the heat generated by the motor and improve the service life and stability of the motor.
3. High strength: The aluminum alloy material has high strength and corrosion resistance, which can ensure the stability and long service life of the motor.
4. Easy to process: aluminum alloy material is easy to process and shape, and can meet the requirements of motor shells with different shapes and structures.
5. Environmental protection: The motor casing made of aluminum alloy has good environmental protection performance and can reduce environmental pollution.

What are the losses of brushless motor?

- Motor failure due to overheating: If a brushless motor operates at too high of a temperature, it could fail prematurely or even break down.

- Electronic failure: Brushless motors rely on complex electronic circuits to operate. If these circuits fail, the motor may not operate properly or at all.

- Mechanical wear and tear: Just like any mechanical device, a brushless motor can experience wear and tear over time. This may result in decreased efficiency or eventually a total failure.

- Damage to the rotor or stator: Damage to the rotor or stator can also cause a brushless motor to malfunction or fail completely.

- Voltage spikes: Sometimes when a brushless motor is operated at high speeds, it can experience voltage spikes which can damage the internal electronics.

How long can a 130mm DC Brushless Motor run continuously?

The run time of a brushless motor depends on various factors such as motor size, quality of parts, temperature, and the load it is carrying. However, in general, brushless motors can run continuously for several hours or even days, provided they are operating under normal conditions and are not overloaded. It is important to note that the motor should be given sufficient time to cool down after extended use to prevent overheating and damage.