How do DC motors avoid clogging?

DC motor is a type of motor with good performance, so it is used by the majority of users. However, the equipment will have problems after a period of use, and the DC motor is no exception, especially when the DC motor is blocked. So how to avoid blocking the DC motor? Let's explain it below.

1. Ensure the safe operation of key equipment. The catalyst is injected according to a certain proportion, and the stop injection time is required not to exceed 15min, otherwise the melt viscosity will decrease and the product quality will decrease. In order to ensure the smooth operation of the DC motor, some guarantee measures should be taken.

2. Regularly replace lubricating oil and wear parts. Its moving parts usually include worms, worm gears, sliders, and new pistons. The wear of these parts will cause the motor flow to decrease or not to flow at all, so these parts should be replaced in time when they are found to be worn.

3. Strict operating procedures. When starting and stopping, the requirements come according to the requirements of use. When starting, ensure that the motor is turned on with zero output, and wait until the outlet of the DC motor has a certain pressure before filling the voltage stabilizing plate with nitrogen to avoid rupture of the diaphragm.