How to prevent DC motor oil leakage?

The permanent magnet's enhanced performance Although the permanent magnet DC motor periodically spills oil while in use, this has certain advantages for us in terms of convenience for our job and daily lives. What steps may be taken then to stop the oil leak in the permanent magnet DC motor? The following Vshida micromotors will discuss several ways to stop DC motors from leaking oil.

1. To ensure that the oil level is barely higher than the oil inlet, add a pipe to the permanent magnet DC motor's oil hole.

2. Configure the auxiliary mechanism and oil motor such that they shut off the oil circuit when the motor is stopped.

3. The valve plate and base plane of the permanent magnet DC motor should both be elastic.

4. When the permanent magnet DC motor is stopped, the check valve mechanism shall automatically close the oil inlet.

5. Attach an air valve to the device's motor port.

6. The static seal and shaft seal components need to be dependable and updated on schedule.

7. Keep the oil around the motor's exhaust valve separate from other oils, and make sure the oil level is barely above the partition wall.

8. To lower the oil level and lower the amount of oil, move the fuel tank and exhaust valve to the side.

For more information about motors, please feel free to contact us