How to prolong the life of micro water pump?

Prolonged use of the micro-pump will cause the pump to burn out or fail, reducing the service life of the micro-pump, so how do we extend the service life of the micro-pump? Let me share with you briefly.

1: There shouldn't be any water on the surface after the pumping operation is finished. Long-term submersion in water could result in water seeping into the pump, which would stop the motor from operating.

2. It is advised that the operating period should not exceed 30 minutes while the pump is under heavy load.

3: To maintain the same voltage, use the micro-voltage. pump's The small water pump typically operates at 12V/24V DC, which is also a safe voltage. It shouldn't be higher than the water pump's typical operating voltage. The motor will be completely destroyed if it is accidentally connected directly to 220V AC electricity.

4: Impurities and solid particles cannot enter the pump cavity. The water intake and exit should be covered with a red dustproof cap even after the work is finished and the materials have been unloaded.

5: Although the water pump can run continuously for 24 hours, it is advised to operate intermittently and to wait 10 minutes before restarting in order to maintain the pump.

The above is the method of extending the micro pump introduced by Vshida Micro Motor. For more information, please contact us.