News

Cogging torque: what is it? The force that causes the rotor of a permanent magnet motor to consistently tend to remain in a particular position when it is motionless is referred to as cogging torqu...

The working principle of the brushless motor is to use electronic switching devices to replace the old contact commutator and brushes to make the motor run more smoothly and reliably and reduce mec...

The capacity will be significantly greater and the micro DC motor with a pure copper coil will be much heavier than an aluminum core motor at the same level. The DC motor's coil has a different col...

The position sensor is one of the components of the brushless DC motor system. Its responsibilities include determining the position of the main rotor relative to the stator windings during motion,...

The fixed torque of the motor, the no-load loss of the motor, the iron loss of the motor, the copper loss brought on by the no-load current of the motor, the tube voltage drop of the controller, th...

Drive motors are essentially a must for the majority of automation equipment, and the same is true for winding machines that create micromotors. How therefore should an acceptable drive motor be co...

Stators, rotors, and other components make up the majority of micromotors. The stator windings are mounted on the stator core, which is a component of the aluminum shell motor's magnetic circuit. W...

Geared motors are typically utilized for transmission devices with low speed and high torque. When in use, it uses a lot of electricity. Everyone is now concerned about the issue of energy conserva...

The driving motor and the gear reducer are combined to create the intelligent lock gear reduction motor. It can be used for many items that need a lot of torque output in addition to providing unlo...

We must disassemble the DC motor when it is broken or when it has to be cleaned frequently. There is a set standard procedure that must be followed during disassembly. The connection between the en...

The tiny DC motor occasionally has trouble turning on during use. What causes the motor to not start? Here is a straightforward analysis for you. 1. There is too much of a load. 2. The main pressur...

The motion of a DC motor is completely controlled by a DC motor controller, an electrical device. How does it adjust the speed when in use? Here is a brief introduction to you. 1. The series resist...