What Are The Failure Modes Of Gear Reducer Motors?
Leave a message
When in use, the tiny geared motor may sustain damage for a variety of reasons, losing some of its functionality. The geared motor can fail in many different ways. I'll give you a little introduction right now.

1. Surface wear on gear reducer motor teeth
The micro gear reducer's transmission process involves relative sliding and friction between the gears' meshing surfaces, and under strain, the gears will wear to some extent. This wear will result in damage to the gear reducer's tooth surface and unstable transmission. Gear wear results in thinner gear teeth, a wider gear gap, and diminished gear strength.A relatively frequent failure mode in gear reducer motors is gear wear.

2. Gear reducer tooth surface pitting corrosion
The meshing surface is constantly in touch with and pressed when the gear of the tiny gear motor is operating. The surface will eventually develop tiny fatigue cracks over time. The fissures will continue to spread throughout the surface while the tiny gear motor continues to run, revealing the reducer's tooth surface. Pits are created when tiny metal fragments fall off. Teeth surface pitting is the name of this failure type (generally only large gear deceleration will have this failure form). Serious tooth surface pitting will render the gear's working surface unusable, making the transmission unstable, noisy, and preventing the gear from functioning.

3. The reduction motor's gear is damaged.
The biggest bending moment and most concentrated stress are at the root of the tooth while the gear reducer is in operation because the force of the gear is similar to the cantilever beam. It is simple to develop fatigue since the bending moment at the gear's root alternates during the gear meshing operation. Cracks cause the gear teeth to break, and this type of failure is known as gear tooth fatigue fracture.
The gear reducer motor introduced by Vshida Micromotor fails in the manner described above. Feel free to contact us if you need further details.







